HSH-1300
13
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
Motor doesn’t work
- Power cord may not be plugged in.
- Power switch is off.
- Check and plug in the power cord.
- Check and turn on the power.
Pouches are not laminating
correctly
- If laminating heat sealed pouches,
the machine may be set in the COLD
mode.
-The temperature may be set too low.
-The speed is set too high.
- Make sure the machine is in the HOT
mode.
- Check the temperature is set
according to pouch thickness.
- Adjust to a lower speed.
SPECIFICATIONS
Model
HSH- 1300
Dimensions
610×295×150 (mm) / 24.0" ×11.6"×5.9" (in)
Maximum Laminating Width
330 (mm) / 13 (in)
Maximum Laminating Thickness
1mm / 1/30" (in)
Film Thickness
75 ~ 250mic / 3-10 (mil)
Heat method
Hot Roller
Warm up time
7 min
Cooling system
DC FAN
Motor Type
DC GEARED MOTOR
Maximum Laminating Speed
3000 (mm/min) / 9.84 (ft/min)
Number of rollers
6
Unit weight
16.5Kg / 36. 4 (lbs)
Voltage supply
100V/120V/220~240V(50~60Hz)
Power Consumption
1350 W
