DFN-30B
5
PARTS
1. Safety grill (Front and Rear)
2. Oscillating Button
3. Control Base
4. Fan Blade
5. Nut and Bolt
FAN ASSeMBLy
1. Remove all items and locate the motor unit.
2. Locate the rear safety grill and position over the protruding pins by aligning the threaded holes at the bottom.
3. Tighten the plastic nut to secure the rear safety grill. (Figure 1)
4. Locate the fan blade and line up with the metal spindle of the motor unit.
5. Tighten the locking nut in the counter clock wise direction. (Figure 2)
** Note: Avoid over-tighten as the bolt is secured in the clock wise direction, the locking nut will tighten gradually with the
operation of the appliance.
6. The safety grill has 3 clips that need to be aligned with the bottom hole for a security nut and bolt.
7. Align the top locking clip to the top of the rear safety grill and lock the side locking clips and align the bottom hole for a
security nut and bolt. (Figure 3)
8. Fasten the nut and bolt through the holes of safety grills.
Plastic nut securing
safety grill
Protruding pins
Fan Blade
Side locking clips
Locking nut
Top locking clip
Figure 1
Figure 2
Figure 3