CS-06D
7
Staples and paperclips
Although our shredders are safe to shred the occasional standard staple, you should remove them if possible. Also, industrial or non-standard, large size staples must
be removed. Paperclips should not be shredded at any time, as they significantly reduce the life of the shredder. Please remove staples and paperclips from paper
before shredding.
MAINtAINANCe
Shut off the switch and unplug the cord before service it.
Use a cloth dampened with a diluted neutral detergent to clean the dirt on the surface of the machine.
• Never use petroleum, essential oil, diluent or silver power on this product.
tRoUBLeSHootING
Symptom
Cause
Solutions
Unit does not work
Unit not set to Auto selection
Set the selection to “auto” mode.
Paper Not touching paper sensor Ensure the paper is fully inserted into the paper entry.
Cutting suspended
Built-in Overheat Protection
Allow the shredder to cool down for about 40 minutes before restarting
Paper Jam
Use the ”reverse” and “forward ” selections to clear paper jam.
Note:
Extensive use of paper clips or other hard materials will result in damages to the cutting system and will void the manufacturer’s
warranty. If you are still having complications, please contact Royal Sovereign’s Service Center.
SpeCIFICAtIoNS
Model
CS-06D
Shred type
Cross cut
Shred capacity
6 sheets
Basket capacity
4.8L (1.3 Gallons)
Shred size
4mm × 30mm (0.16" × 1.18")
Noise level
< 63dB
Shred speed
1.9m/min
Run Cycle time
3min
Throat size
220mm (8.66")
Dimensions (W×D×H)
160 × 282.5 × 342 (mm) (6.3" × 11.1" × 13.5")
Weight
3.6kg (8 lbs)
power
120W
Voltage
AC120V 60Hz
