4
1.Plug in the machine.
2.Before starting the machine, ensure the sliding doors are properly closed.
3.For lighting, press the light button below the thermostat.
4.
5.
6.
Press for 3s to startup.
Press for 3s to shut down.
Set temperature: press for 1s, the setting temperature flashing, and then press
to
en
ter the setting temperature. It will display the working temperature after stopping setting for 6s.
CAUTION:
You are suggested not to reset the temperature controller frequently.
The factory default value of set temp. is 65°C.
Maintance:
The machine is suitable for an ambient temperature ranging between 32
℃
.
Cleaning
For health standard and quality of beverages or foods, clean interiors of machine as often as possible.
Please clean the removable condenser filter at least monthly.
Caution:
1.
Before carrying out cleaning, remove the power plug
2.
Do not use abrasive powders that might impair the interior parts of showcase
3.
Use neutral soap and a little warm water to wash the interiors, Rinse carefully with
water in
order to remove any residual of soap
Disposal
Render old machine unusable:
I
.
Pull out the mains plug,
2
.
Cut off the power cable and discard with the plug,
Caution:
Refrigerants in refrigeration machines and gases in thermal insulation must be disposed of
professionally. Please discard the machine according to the local regulations.
Gelato Display Showcase
1.
Please ensure you use the correct gelato pans for your unit.
2.
These units are not designed for overnight storage. It is recommended that all product is
removed after service period and stored in a storage freezer
.
3.
It is required to turn this unit off every few days to defrost naturally. Ideally 2-3 times a week. This
can vary depending on location, ambient temperature, number of door opening per day
.
a)
Remove product to storage freezer
b)
Unplug and turn unit off
c)
Do not change settings
Hot Pastry Showcase