Page 9 of 1
3
LIGHTING INSTRUCTIONS
1.
Turn the cylinder valve on the gas tank counter-clockwise to open the
gas supply.
2.
Close the storing door on the firebowl for the gas tank.
3.
Press and hold the Electric Ignitor. Meanwhile, push and turn the
Control Knob counter-clockwise to the "LOW" position. Keep pushing
the Control Knob to light the burner .
4.
After ignition, release the Electric Ignitor. Continue to push and hold
the Control Knob for 45 seconds
.
5.
If ignition does NOT immediately take place in seconds, push and turn
the Control Knob clockwise to "OFF". Wait 5 minutes, then repeat the
lighting procedure as above.
6.
If the burner does not ignite with the valve open, gas will continue to
flow out of the burner and could accidently ignite with risk of injury.
HOW TO EXTINGUISH ?
•
Push the Control Knob and turn clockwise to the "OFF" position.
•
Turn the cylinder valve on the gas tank clockwise to close the
gas supply if not in use for a long time.(See figure below)
Operation
