Assembly
STEP 9
Requires:
BB, II, C
Assembling the Dome Assembly
Attach the dome assembly to the burner assembly (C) by securing the wing nuts (II) to the
reflector spacers (BB).
TM21PATHTRSS1
STEP 10
Requires:
C
Connecting the Cylinder
Connect the preassembled regulator assembly from the burner assembly (C) to a 20-lb. LP-gas
cylinder (sold separately). Line up threads on the cylinder fitting with those on the regulator and
rotate clockwise until tight.
HAND TIGHTEN ONLY. DO NOT USE ANY HAND TOOLS TO MAKE THIS CONNECTION.
Be careful not to cross threads when screwing in the fitting.
To disconnect the LP-gas cylinder, first make sure the cylinder valve is in the "OFF" position.
Then, turn the knob on the regulator assembly counterclockwise until it is loose.
WARNING:
Before connecting, be sure there is no debris caught in the head of the LP-gas
cylinder regulator valve or in the head of the burner and burner ports.
II
C
BB
20 lbs
12.2 in.
20 lbs
17.9 in.