Assembly
STEP 3
Requires:
DD, A, D
Attach the support bar (D) to the chair bucket (A) using M8x20 combination hex bolts (DD).
Do not fully tighten the bolts at this step.
NOTE: Loosely tighten the bolts using the wrench (FF).
FCS70438RSTRGDS
Assembly
STEP 4
Requires:
CC, D, E
Attach the left leg (E) to the support bar (D) using M8x28 combination hex bolts (CC).
Do not fully tighten the bolts at this step.
NOTE: Loosely tighten the bolts using the wrench (FF).
Assembly
D
DD
DD
A
E
D
C
C
C
C
