For more information, look at the net at
www.royal-exclusiv.de
. Simply enter the part number or name into the search box
or email to:
. All information without guarantee. We try our best, but printing errors reserved.
6
For more information, look at the net at
www.royal-exclusiv.de
. Simply enter the part number or name into the search box
or email to:
. All information without guarantee. We try our best, but printing errors reserved.
7
The ceramic shaft is very sensitive and may break
immediately if bent.
Now delime the impeller unit
using a suitable deliming bath.
Never use hydrochloric acid - not even diluted!
This may damage the pump. Suitable substances are: for-
mic acetic phosphoric acid or common deliming agents for
water purification appliances like coffee makers. The con-
tainment shell of the motor must also be delimed.
Coarse, greasy plaques must be removed under ordinary
tap water prior to deliming using a mediumcoarse brush.
Please observe the relevant safety regulation attached to
every sales package prior to using deliming acids. Wear
protective clothing and goggles.
For assembly:
fix the O-ring in position, then carefully let
the magnetic impeller with the lip on top click into place.
Caution ! Strong magnetic forces !!
Blocked bearings may cause damage to the pump or pre-
vent it starting up, due to the O-ring grinding against the
bearing seat.
4. Cleaning the nozzle and suction pipes
Only skimmer pump!
The suction pipe with 10 mm for air induction (red) and
6 mm for ozone (grey) needs regular decalcification and
cleaning as, depending on the degree of lime content in
the water, a plug may form, which can impair the overall
the performance of the pump and deteriorate skimming
drastically.
Please inspect and decalcify the nozzle regulary !! Re-
move major cloggig using a pointed tool before decalci-
fication.
