sharp edges or moving parts. Damaged or tangled cords increase the risk of
electric shock.
e)
If you cannot avoid using the unit in a wet environment, use a residual current
unit (RCD). Using an RCD reduces the risk of electric shock.
f)
Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or unit itself in water
or other liquid. Do not use the unit on wet surfaces.
h)
Do not allow the machine to get wet. Risk of electric shock!
2.2.
Safety in the workplace
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the unit.
b)
Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust.
c)
If you have any doubts as to whether the unit is working properly or if it is
damaged, contact the manufacturer's service department.
d)
Only the manufacturer's service department can repair the unit. Do not carry
out repairs yourself!
e)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f)
Keep these instructions for use for future reference. If the unit is to be passed
on to a third party, the operating instructions must also be handed over
together with the unit.
g)
Keep the packaging and small assembly parts out of the reach of children.
h)
Keep the unit away from children and animals.
Please note!
Keep children and other bystanders safe while operating
the unit.
2.3.
Personal safety
a)
Do not operate this unit if you are tired, ill or under the influence of alcohol,
drugs or medication that could impair your ability to operate the unit.
b)
The unit is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or persons who lack
experience and/or knowledge unless they are supervised or have been
instructed by a person responsible for their safety on how to operate the unit.
