1.
LED: Power On
2.
LED: Heating On
3.
Temperature control knob
4.
Timer
5.
Grill
6.
Drawer
7.
Heating switch
8.
Power switch
3.1.1. OPERATION RCET 360H-UK
a)
Set the Heating switch to „0-OFF” and plug in the
appliance to power supply.
b)
Turn on the appliance by setting the On/Off switch
(8) to „I“. Remove the grate handle during heating to
avoid burns.
c)
Use the Heating switch to choose the heating type
(All – all heating elements, Part – some heating
elements, OFF – heating elements OFF). The LED (3)
lights up.
d)
Use the Timer to set the cook time. When inserting
and removing food from the grate, use the grate
handle.
e)
Switch off the heaters after use with the Heating
switch. Set the Power switch to “0-OFF“ and unplug
the appliance from the power supply.
3.2. PREPARING FOR USE
Appliance location
The temperature of environment must not be higher than
35°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is used. The distance between each side of the device and
the wall or other objects should be at least 10 cm. Keep the
device away from hot surfaces. Operate the device on flat,
stable, clean, refractory and dry surfaces out of the reach
of children and people with mental disabilities. Install the
device making sure that constant access to the main plug is
ensured. The power cord connected to the appliance must
be properly grounded and correspond to the technical
details.
Before first use, remove all elements and clean them along
with the entire device.
3.3. DEVICE USE
Operation:
a)
Set the Heating switch to „0-OFF” and plug in the
appliance to power supply.
b)
Turn on the appliance by setting the On/Off switch
(1) to „I“. Remove the grate handle during heating to
avoid burns.
c)
Use the Heating switch to choose the heating type
(All – all heating elements, Part – some heating
elements, OFF – heating elements OFF). The LED (3)
lights up.
d)
Use the Timer to set the cook time. When inserting
and removing food from the grate, use the grate
handle.
e)
Switch off the heaters after use with the Heating
switch. Set the Power switch to “0-OFF“ and unplug
the appliance from the power supply.
3.4. CLEANING AND MAINTENANCE
a)
Before each cleaning, adjustment, replacement
of accessories and if the device is not used, it is
necessary to pull out the mains plug and cool the
device completely.
b)
Use cleaners without corrosive substances to clean
each surface.
c)
Use only mild detergents suitable for washing
surfaces which come into contact with food to wash
the device.
d)
After cleaning the device, all parts should be dried
before reusing it.
e)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
f)
Never spray the device with water jets.
g)
Remember to prevent water from penetrating inside
the device through vents in the housing of the device
h)
Clean the vents with a paintbrush and compressed
air
i)
Regular inspections of the device must be carried out
in terms of its technical efficiency and any damages
j)
Use a soft cloth for cleaning.
EN
Rev. 24.03.2021
Rev. 24.03.2021
5
4
NOTES
