Art
icle number:
A
SS200
400
17
0
1
Document number: DOC
-000
310 r
evision B
Note
O
Integrated environmental sealing system for potential equalization applications. For use with shielded/armored cables.
O
For optimum reliability, wait 24 hours or longer after installation before exposing the cables or pipes to strain or pressure.
O
Corrosion preventing primer must be removed to achieve electrical conductivity, where applicable.
O
Protection paper and plastic film must be removed on all modules.
O
Cables shall go straight through the frame.
O
If the conductive tape is damaged, the module must be replaced.
O
Roxtec installation tools are available.
O
Approvals or certificates may include amendments or limitations related to this application.
O
The latest version of this and related documents are found at roxtec.com.
R
oxt
ec ® and Mult
idiamet
er ® ar
e r
egist
er
ed t
rademarks o
f R
oxt
ec in S
w
eden and/
or o
ther count
ries
.
Roxtec International AB
Box 540, 371 23 Karlskrona, SWEDEN
Phone +46 455 36 67 00, Fax +46 455 820 12
Email [email protected], www.roxtec.com
Disclaimer
”The Roxtec cable entry sealing system (”the Roxtec system”) is a modular-based system
of sealing products consisting of different components. Each and every one of the com-
ponents is necessary for the best performance of the Roxtec system. The Roxtec system
has been certified to resist a number of different hazards. Any such certification, and the
ability of the Roxtec system to resist such hazards, is dependent on all components that
are installed as a part of the Roxtec system. Thus, the certification is not valid and does
not apply unless all components installed as part of the Roxtec system are manufactured
by or under license from Roxtec (“authorized manufacturer”). Roxtec gives no performance
guarantee with respect to the Roxtec system, unless (I) all components installed as part of
the Roxtec system are manufactured by an authorized manufacturer and (II) the purchaser
is in compliance with (a), and (b), below.
(a) During storage, the Roxtec system or part thereof, shall be kept indoors in its original
packaging at room temperature.
(b) Installation shall be carried out in accordance with Roxtec installation instructions in
effect from time to time.
The product information provided by Roxtec does not release the purchaser of the Roxtec
system, or part thereof, from the obligation to independently determine the suitability of
the products for the intended process, installation and/or use.
Roxtec gives no guarantee for the Roxtec system or any part thereof and assumes no
liability for any loss or damage whatsoever, whether direct, indirect, consequential, loss of
profit or otherwise, occurred or caused by the Roxtec systems or installations containing
components not manufactured by an authorized manufacturer and/or occurred or caused
by the use of the Roxtec system in a manner or for an application other than for which the
Roxtec system was designed or intended.
Roxtec expressly excludes any implied warranties of merchantability and fitness for a parti-
cular purpose and all other express or implied representations and warranties provided by
statute or common law. User determines suitability of the Roxtec system for intended use
and assumes all risk and liability in connection therewith. In no event shall Roxtec be liable
for indirect, consequential, punitive, special, exemplary or incidental damages or losses.”
