19
20
21
22
23
24
25
26
27
28
Drill 2 holes in each of the triangular corner supports.
Using 2 x 40mm screws, secure a corner support in each corner.
Attach arches using 2 x 40mm screws per arch.
Screw through the pre-drilled hole of the upright into the roof bearer.
Drill a hole in each end of the lower roof bearer support
Position the lower roof panels between the roof bearers.
Drill 2 holes in each arch piece. Note that there is a left and right angled arch piece.
Secure the lower roof bearer using 1 x 130mm screw per upright.
Shows Lower roof supports in place.
Secure the bearer support as shown using 2 x 50mm screws
Align the roof bearer with the bottom
of the mid sized fence as shown.
