© 2021 Rowley
®
Company. All rights reserved. R-TEC Automation
®
is a registered trademark of the Rowley
®
Company, LLC.
5
INSTALLATION
SENSOR BATTERY
REPLACING BATTERY
Pull battery tab out to activate for first use.
Pry open using flat head screwdriver
where notches meet on the sensor.
Remove old battery by
pressing up from under the
battery's position.
Push new battery in with the
positive (+) side facing outwards.
Replace cover by aligning
notches and press together.
Battery CR2032
Battery CR2032
MOUNTING
1. Ensure surface on glass is clean and free of dust.
2. On the back of the sensor, peel clear plastic off to reveal adhesive.
3. Find desired position on glass for the sensor and press adhesive side to glass.
4. Check that the glazing or the tint on the window will not affect the functionality of the Sun Sensor.
5. Ensure that the light level is enough to activate the Sun Sensor. If it is possible to measure the light intensity using the
Lux-meter. The values measured should be according to the level of the sensor mode selected.
