Rowenta Silence Force Extreme Compact RO57 Series, Manual

Page: 7 / 30

EN
1 • Assembling the elements of the
appliance
Push the flexible hose into the vacuum inlet
(Fig.1) and turn until it locks. To remove it, turn
in the opposite direction and pull.
• Push the metal telescopic tube into the end of
the power nozzle until you hear a locking ‘click’
(Fig.2) (to release it, push the locking button on
the tube and remove it).
•Push the all floor type nozzle (22) into the end
of the metal telescopic tube until you hear a
locking ‘click’ (Fig.3) (to release it, push the
locking button on the nozzle and remove it).
• Adjust the telescopic metal tube to the
required length using the telescopic system
(TELESCOPIC SYSTEM) (Fig.4)
Fit the appropriate accessory to the end of the
metal telescopic tube or the power nozzle:
- For rugs and carpets: use the all floor type
nozzle in the retracted brush nozzle position or
the Maxi turbo brush* (fibers and animal hair).:
- For parquets and hard floors: use the all floor
type nozzle in the advanced position or, for a
better result, use the parquet nozzle*.
- For corners and hard to reach spots: use the
telescopic crevice tool*.
- For furniture and fragile surfaces: use the
brush built into the power nozzle (EASY
BRUSH) or the upholstery nozzle*.
2 • Plugging in the power cord and
switching on the appliance
Unwind the power cord completely, plug in
your vacuum cleaner and press on the On/Off
button (Fig.7).
Remark: you can use your vacuum cleaner in
the horizontal position (sleigh position) but
also in the vertical position, notably when you
are vacuuming the stairs or removing dust
from the curtains.
Adjust the suction power:
⇨
using the electronic power control (Fig.8) :
• Position (MIN) for vacuuming delicate
fabrics (curtains, textiles)
• Position (Medium) for everyday
vacuuming for all types of
floors, which are only slightly
dirty
• Position (MAX) for vacuuming hard
floors and very dirty rugs and
carpets.
⇨
with the manual power nozzle switch :
open the power control flap in order to reduce
the suction power manually and avoid the
nozzle ”sticking” to the surface that has been
vacuumed (Fig. 9a* or 9b*) e.g.: curtains,
fragile surfaces…
3 • Storing and carrying your
vacuum cleaner
After use, switch off your vacuum cleaner by
pressing the On/Off switch and unplug it
(Fig.10). Rewind the power cord by pressing
the power cord rewind button (Fig.11). In the
vertical position place the nozzle in the parking
position (Fig.12).
This allows you to carry and store your vacuum
cleaner when it is in the parking position
(Fig.13).
USING THE APPLIANCE
IMPORTANT Never operate your vacuum
cleaner without its bag and without its filtration
system (cassette).
IMPORTANT Always switch off and unplug
your vacuum cleaner before changing the
accessories.
ERGONOMIC RECOMMENDATIONS
Comfortable to use, the ERGO COMFORT SI-
LENCE range has been designed to make using
your vacuum cleaner an easier and more en-
joyable experience.
So that you can keep an upright position and
avoid bending your back, make sure you:
1. Adjust the length of the metal telescopic tube
ERGO COMFORT SILENCE to suit your height
(Fig.5).
2. Place your second hand in front of the power
nozzle handle ERGO COMFORT SILENCE (Fig.6).
* According to model: these systems are specific to certain
models or are accessories available as an option.
4
RO_ASPIRATEUR_SFE_COMPACT_NAFTA_747270-01_Nafta 03/12/13 08:55 Page4