Rowenta Power Press Instructions For Use Manual Download Page 5

  

6

 BURST OF STEAM

M

To remove stubborn wrinkles or
press in a sharp crease, use the
burst of steam button.

M

Press the button firmly, a strong
burst of steam penetrates deep
into the fabric.

M

Leave an interval of at least 

four

seconds between pressing the
burst of steam button.

M

With water in the tank, the burst of
steam button can be used as soon
as the steam ironing temperature
has been reached (

●●●

).

  

7

 VERTICAL STEAM

M

The iron can also be used vertically.
This is especially useful for getting
creases out of hanging clothes,
curtains, tapestries, etc.

M

To steam vertically, press the burst
of steam button while holding iron
in the upright position.

Warning:
Never iron clothes while they are being worn.

  POINTS TO NOTE

If the iron has not been used for a long time (e.g. several
weeks) the steam channels should be cleaned and any
deposits removed from the iron. To do this, hold the iron
horizontally before you start to use it and allow it to produce
steam for about 1 minute. Also activate the burst of steam
button several times.

  

8

 DRY IRONING

M

Slide the variable steam control
fully to the left (min.). We recom-
mend dry ironing with an empty
water tank to be sure there are no
drips.

  AFTER IRONING

M

Unplug the iron. Set the variable steam control to max.
and empty any water left in the tank. Then set the variable
steam control to min. and leave the iron to cool.

M

For easy storage the cord can be wound loosely around the
heel once the iron has cooled down completely.

M

To protect the soleplate always store the iron on its heel.

Important:
Always empty the water tank when ironing is finished.

6

7

8

min

max Clean

Self

Summary of Contents for Power Press











Reviews: