Proceed as follows:
• Fit the empty filter holder, and place the
espresso cups underneath it.
As soon as the appliance has reached the
right temperature, the orange LED stops
flashing.
• Press the 2 cup or 1 cup button according to
what you require.
• Once the cup(s) are filled with hot water,
move the selector back to the "0" position
• Release the filter holder by pressing the
"EJECT" button lightly and turning it
towards the left
(fig. 1)
. If required, remove
the paper around the pod following the
dotted lines
(fig. 12)
. Place the E.S.E pod
with the red writing facing downwards (fold
the corners of the filter paper back). Ensure
that the paper is placed inside the filter,
otherwise this could cause leaks. For
creamier and thicker froth, the E.S.E pod
must be positioned correctly. The pod is
designed to make one cup of coffee. The use
of 2 E.S.E pods on top of one another is not
recommended.
• Insert the filter holder into the appliance
tightening it by turning it towards the right
as far as possible
(fig. 3).
• To prepare your espresso, follow the same
procedure as for the preparation of an
espresso with ground coffee.
With a soft pod
• Before removing the removable tank,
remember to place the selector d1 in the
position "0".
• Fill the tank with cold water and fit it back
onto the appliance
(fig. 7 and 8)
.
• Switch on the appliance by pressing the
ON/OFF button d2.
• The LED flashes during preheating, then
remains lit. The appliance is then ready for
use.
For best results, we recommend warming up
the accessories beforehand (filter holder and
cups) without adding any ground coffee.
Proceed as follows:
• Fit the empty filter holder, and place the
espresso cups underneath it. As soon as the
appliance
has
reached
the
right
temperature, the orange LED stops flashing.
• Press the 2 cup or 1 cup button according to
what you require.
• Once the cup(s) are filled with hot water,
move the selector back to the "0" position
• Release the filter holder by pressing the
"EJECT" button lightly and turning it
towards the left
(fig. 1)
. Place a soft pod
into the filter holder. The pod is designed to
make one cup of coffee. The use of 2 pods
on top of one another is not recommended.
• Insert the filter holder into the appliance
tightening it by turning it towards the right
(fig. 3)
. The more it is compressed, the
stronger the espresso will be.
• To prepare your espresso, follow the same
procedure as for the preparation of an
espresso with ground coffee.
7. PREPARING THE STEAM
The steam is used to froth the milk (for
example when preparing cappuccinos or hot
chocolate) and heating water (for tea and other
hot drinks).
• Turn the selector d1 to the position
(fig. 13)
(to obtain more steam, the temperature needs
to be higher than when making coffee).
• The ON/OFF button LED flashes again then
remains lit. The appliance is then ready for
use.
• Place the liquid to be heated into a recipient.
For best results, we recommend pouring the
liquid to be heated or frothed into a recipient
with a narrow neck (a small jug for
example).
• Plunge the steam nozzle into the liquid.
• Turn the selector d1 to the position
(steam)
(fig. 14)
: the steam pours into the
liquid.
• For good frothy milk, use circular
movements and move from top to bottom
(fig.
15)
.
The
pump
operates
intermittently, this is normal.
16
ENG
Your machine is also compatible with
soft pods (generally 60 mm in diameter).
As this type of pod is not specifically des-
igned for espresso machines, you will
obtain a weaker espresso than with an
E.S.E. pod.
ROWENTA 6200 - EO:0828112 9/07/08 9:48 Page 16
