7
* depending on model
The iron should be allowed to emit steam for at least 1 minute
to remove any impurities.
Press the burst of steam button a few times prior to ironing.
This should also be done if iron isn’t used regularly.
8 • Auto Steam*
For steam output to be automatically adjusted to
the soleplate temperature, turn the steam control
to the
position.
9 • Burst of Steam
This feature is ideal for removing stubborn
wrinkles or pressing in sharp creases.
When the temperature control is set to a steam
setting (•• or •••) the burst of steam can be used.
Press the button to generate a burst of steam.
Leave an interval of at least four seconds
between bursts.
10 • Vertical Steam
This feature is ideal for hanging clothes, drapes,
curtains, etc.
When the temperature control is set to a steam
setting vertical steam can be used.
To use feature, hold iron vertically with the tip
tilted forward slightly.
Press the burst of steam button repeatedly while
moving iron up the garment from bottom to the top.
If vertical steam output starts to decrease tilt iron
forward to a horizontal position and then back to
vertical to continue.
WARNING ! Never direct steam at persons or animals.
AUTO
DZ5080 US 1103481042 18/04/06 15:21 Page 7
