Rowenta COMPACT FORCE RO78 Series, Manual

Page: 17 / 60

12
Packaging: the packaging protecting your appliance consists
of environment-friendly and recyclable materials. Packaging
that is no longer used should be disposed of at specially
designated collection points.
The used appliance: do not dispose of your appliance with
household waste. Your appliance contains numerous
valuable or recyclable materials and therefore should be
given to a dealer or a recycling centre for disposal.
Think of the environment!
Used filters: as they do not contain forbidden substances in
terms of household waste, the used filters can be disposed of
with household waste.
DISPOSAL/ENVIRONMENT
* According to model: these systems are specific to certain mo-
dels or are accessories available as an option.
EN
WHERE TO BUY ACCESSORIES
ACCESSORIES* USE
FITTING
THE ACCESSORY
PLACE OF
PURCHASE
Upholstery brush For cleaning upholstery. Attach the upholstery brush to
the end of the nozzle.
Rowenta
Authorised
Service
Centres
Upholstery nozzle
For cleaning upholstery. Fit the upholstery nozzle
to the end of the nozzle or tube.
Telescopic crevice
nozzle
For corners and hard to
reach spots.
Fit the telescopic crevice nozzle
to the end of the nozzle or tube.
Rectangular
parquet nozzle
For delicate floors. Fit the parquet nozzle
to the end of the tube
DELTA parquet nozzle
For delicate floors. Fit the DELTA parquet nozzle
to the end of the tube.
Mini turbo-brush
For deep-cleaning
upholstery fabrics.
Fit the mini turbo-brush
to the end of the tube.
Turbo-brush
For removing animal hairs
and fibres embedded in rugs
and carpets.
Fit the turbo-brush
to the end of the tube.
If the cone separator (4a) fills up
• Dust accumulates in the separation compartment (4c):
Check that the pipe between the separator (4c) and the dust
compartment (5) is not blocked. Check that nothing is
obstructing the dust compartment inlets.
• The dust compartment inlets are blocked: remove the dust
compartment and empty it. Clean the dust compartment seals.
If it is difficult to move the nozzle
• Open the manual power switch* on the nozzle.
If the power cord does not wind completely
• The cord slows down as it winds up: pull the power cord
out again and press the power cord wind button.
In the event of a persistent problem, take your vacuum cleaner
to your nearest Rowenta Approved Service Centre or contact
Rowenta Customer Services.
TROUBLESHOOTING