Rowenta CF9320E0, Instructions For Use Manual

Page: 10 / 72

- 1: moderate temperature and blowing speed
- 2: high temperature and blowing speed
- *: cold air
- 0: appliance switched off
REMINDER: The brush accessory (H/I) is very hot when
in use. Be careful when removing it.
Removing the brush:
- Remove the brush from its recess.
! ! !
#
DIRECTION OF ROTATION (C):
This function enables you to automatically wind the sec-
tion of hair around the brush to blow dry your hair effortle-
ssly.
- To start rotation, press the selector switch (C) in the desired
direction of rotation (right or left).
- Keep pressing the switch while blow drying.
- To stop rotation, release the switch.
This is the basic technique of blow drying.
DRYING AND STYLING IN ONE GO!
- After washing your hair, dry it well in a towel and carefully untangle it.
Do not use your brush on tangled or backcombed hair or on hair extensions.
- You can pre-dry your hair with the drying function (B) (without the brush) while still keeping
your hair damp.
- Divide your hair into individual sections a few centimetres wide (see booklet "professional tips")
and work on one section at a time. You can use clips to hold up the other sections of hair.
- Fit the brush (large or small diameter, depending on the length of your hair and the desired
effect) to the body of the appliance, pushing it until it clicks home.
HOW TO USE YOUR BRUSH? :
IONIC SYSTEM:
your appliance automatically emits negative ions to eliminate static electricity. You hair will shine
and be easier to untangle.
CLIC!
FITTING THE BRUSHES AND REMOVING THEM FROM THE APPLIANCE
(K) :
AIR TEMPERATURE / SPEED (B):
EN N
- - $.42