Rowe Scan 450i 24 inch KIT 40, Operating Manual

Page: 27 / 146

26
By actuating "
Finish
“ (Figure 2.16
),
the driver
installation is being completed.
Figure 2.16: Driver installation finished
2.9 Establishing Connection to Scanner
After having restarted the computer, start the
Setup Wizard
via
Start
→
Programs
→
ROWE
Scan Series
and follow the instructions.
Figure 2.17: Start Setup Wizard
The Setup Wizard now establishes the
connection between scanner and computer
automatically. This process may take some time
depending on the PC performance.
If you actuate the
"Cancel"
button
during the connection process,
installation is canceled.
If the connection cannot be established,
check the connection lines and whether
the scanner is switched ON. If the
operating LED is flashing, the scanner is
Figure 2.18: Connection establishment