24
2.7
Shutting Down Computer – Connecting Scanner – Switching ON
Computer and Scanner
After actuating
„Finish“
you are prompted
to shut the computer down (Figure 2.11).
Please confirm by actuating
"Yes"
. Now wait
until the computer has been shut down and
switched OFF.
Figure 2.11: Prompt to shut computer down
After having switched the computer OFF,
proceed as follows:
1.
Connect the computer to the
scanner using the USB cable. Use
the supplied USB cable (see Figure
2.12).
2.
Connect the scanner to the power
supply using the supplied power
unit.
3.
Switch the computer ON again.
Figure 2.12: USB plug (connection scanner)
