Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
1-800-658-5925
Page 2 of 3
5.) Install the supplied #180 straight stabilizers onto the top of the door panel and the panel adjacent to it (left
photo below) and install two #90 corner stabilizers removed from the Roverpet Whelping Box onto the top
of the two corner panel connections (right photo below).
6.) Place the #F24
– 2’x4’ floor, flat side down, on your floor. Make sure the #F24 floor is resting completely
flat on your floor surface
7.) Place the Roverpet Whelping Pen around the floor, with the flat side facing down. The Roverpet Whelping
Pen will rest around the outside of the #F24 floor frame
8.) Install
(1)
#250 floor clip in the middle of the Roverpet Whelping Pen. Snap the clip over the panel frame
and #F24 floor frame, securing the panel to the #F24 floor.
