Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
800-658-5925
Page 2 of 3
STEP 5:
Install pad over both legs by sliding the connector rings over the legs, with the pad facing upwards.
STEP 6:
Install the four uprights into the leg sockets.
STEP 7:
Install the two remaining short cross bars into one side of the uprights, in the
same orientation as the prior short cross bars.
STEP 8:
Install second pad by sliding the connector rings over the four uprights, with
pad facing in the upwards direction.
STEP 9:
Install third pad over both arms by sliding the connector rings over the arms, with
pad facing in the down ward position.
STEP 10:
Install the two long cross bars into the pre-drilled holes on one arm.
STEP 11:
Slide the #CSR-12 cat scratch roller over one of the cross bars that
you have attached to the arm.
STEP 12:
Insert the cross bars into the other arm.
STEP 13:
Insert the connectors of the uprights into the arm sockets, pressing firmly to insure a secure fit.
