background image

SETTING UP 
Plastic grass catcher assembly

 

• 

Refer to the “Set Up Instructions” attached to the grass catcher lower half.

 

 

 

 

 
 

 
 
 
 

 
 
 
 
 
 
 
Engine oil 

Oil must be added before attempting to start the engine otherwise damage to the engine 
will occur. 

Refer to the engine owner’s manual.

 

The 4 stroke engine fitted to the lawnmower 

is shipped with no oil

 in the sump.  

 

Engine fuel 

Refer to the engine owner’s manual. 
Use only fresh unleaded fuel in the lawnmower engine.  

 
 

OPERATION

 

- All mowers

 

Adjusting the cut height– 

refer figure 2. 

 
 
The lawnmower 13 height settings are controlled by the 
height adjustment lever located at the rear right hand wheel. 

• 

Grasp the height adjustment lever (1) and pull the lever 
away from the base to disengage the lever from the 
height adjustment rack (2).

 

• 

Move the lever either forwards or backwards to the 
desired position and release the lever so as to engage 
in the height adjustment rack. 

 

When selecting the cut height stand to the rear of the machine with your feet 
well clear of the cutting blades. 

WARNING 

 

Figure 1. Grass Catcher—Assembled

 

Grass Catcher 

Upper Half 

Grass Catcher 

Lower Half 

Figure 2. Height adjustment

 

(2) 

(1) 

Summary of Contents for Domestic Domestic Rotary Lawnm













Reviews: