33
UNDERSTANDING PARKING MODE
How To Test This
Parking mode works as follows. Let's say you went shopping and
parked your car in the parking lot. Then someone hits your car
while backing up their car, then the impact caused by hitting your
car makes your camera vibrate, which then activates the built-in
G-sensor and then parking mode, which then turns ON your
camera automatically and starts recording for 1-min, then it locks
and saves that video file so it does NOT get deleted by the loop
cycle function, then the camera turns OFF automatically. Now
when you come back from shopping and see that your car has
been hit, you should check the saved videos on your camera to
see if parking mode got activated. Please note that you should
keep parking mode feature turned OFF while exploring the other
features of the camera in your hand, otherwise every time it
detects movement, it will turn the camera ON for 1-min and then
turn OFF (Which some customers think that camera is random
turns ON/OFF and is defective). So only turn ON this feature
after you install the camera on your car's windshield unless you
like to test this feature as described below.
To test this feature, turn ON parking mode & set it to LOW /
Medium Impact Detection. Now turn OFF the camera by pressing
and holding the power button for 2 seconds. Then Shake the
camera in your hands, this will turn ON camera for 1-min and
then turns OFF after 1-min.
