1313-17F957IM-AA 20120803RA
Page 13 of 25
1-800-59-ROUSH
16. Cut off the area marked on the bumper cover and repeat steps 11-16 for the
opposite side.
17. Cut out the locator/U-Nut template provided in the kit (P/N: 1313-17F958TMPL),
tape the template to the bumper cover.
Using a center punch, mark the the center of the holes on the template.
Cut the 9/16” and the 3/8” holes out of the template and trace the holes to cut
on the bumper cover.
Repeat above steps for the opposite side.
