Operating Instructions
IMPORTANT:
Please read these instructions carefully before
operating the locomotive
SAFETY PRECAUTIONS
This is a working battery diesel model locomotive. Provided it is
operated with reasonable care and attention, no problems should
arise. The motor used in this locomotive is very powerful and you
should avoid touching the moving parts when in motion. As you will
appreciate, this is not a toy and is therefore unsuitable for
unsupervised children.
ACCESORIES INCLUDED.
Radio Transmitter.
Charger for locomotive.
Back to Back gauge and Allen key.
Small pot of silicone grease for lubricating worm drive.
ALTERING WHEEL GAUGE
Ensure the locomotive is switched off.
Turn the model upside down to gain access to the wheels. The
driving wheels are moveable on their axles and are locked in place
by 2 small grub screws. Manually moving the steel motor worm
drive with your index finger will turn the wheels and bring the grub
screws into a position where they can be loosened using the Allen
key provided. Note that there are 2 grub screws on each wheel.
The wheels should be adjusted so that the ‘back to back’ gauge
supplied will just slip between their inner faces. Ensure that the
wheels are evenly spaced relative to each side frame and gently
nip-up the grub screws.
Do not over tighten the grub screws.