rough country Slim Line LED Light Grille Kit, Manual

Page: 2 / 8

1. Remove the push pin clips from the top of the grille cover. See Photo 1. Save for reuse.
2. Remove the grille cover, set aside for reuse. See Photo 2.
3. Remove the 4 bolts in the top of the grill, use a 10mm socket. See Photo 3. Save for reuse.
4. Unplug the shutter motor in the top of the grille. See Photo 4.
5. Using an auto trim puller, release the shutter motor wiring clip from the grille. See Photo 5.
6. Remove the 2 screws in the fender flare on each side of the vehicle, use a 7mm socket. See Photo 6. Save for re-
use.
Photo 1 Photo 2
Photo 3 Photo 4
Photo 5 Photo 6
Remove the push pins from the grill cover. Remove the grill cover.
Remove the 4 bolts in the top of the grille. Unplug the shutter motor.
Release shutter motor wiring. Remove the 2 screws from fender flare.
INSTALLATION INSTRUCTONS