19. Tighten the 1/4” bolts using a 5/32” Allen and a 7/16” wrench.
Do not rotate the head of the bolt when tightening.
See Photo 18.
20. If installing grille with no light, skip to step 23.
21. If installing the mesh grille with the 30” LED, install the light mounting brackets using the supplied 1/4” x 5/8” bolts
and nuts.
Do Not Tighten.
See Photo 19.
22. Install the light on the brackets and tighten using the supplied Allen, then center and tighten the mounting bolts on
the grille using a 5/32” Allen and a 7/16” wrench. Wire the light according to the instructions included with the light.
23. Assemble the upper grille trim and the upper grille mesh using the supplied 1/4” x 5/8” bolts and nuts
(Do not
tighten)
through the mounting brackets,
See Photo 20
, and the supplied 1/4” x 1/2” bolts and nuts in the remaining
holes. Tighten bolts not going through a mounting bracket using a 5/32” Allen and a 7/16” wrench.
Do not rotate
the head of the bolt when tightening. You may have to bend the mesh grille to follow the lines of the factory
grille trim.
24. It may be necessary to trim the grille at some mounting locations to clear the mounts.
See Photo 21.
25. Trim using a reciprocating saw.
See Photo 22.
26. Using the mounting bracket as a guide and drill the 8 mounting holes into the factory grille shell using a 11/64” drill.
Photo 18
Photo 19
Tighten the grille mounts.
Attach the light mounting brackets.
Photo 22
Trim grille for mounting bracket.
Photo 23
Drill using a 11/32” drill.
Photo 20
Photo 21
Assemble mesh grille and mounting brackets.
Trim grille for mounting bracket.
