Introductions / Safety / Installation
2-1
SG9A Manual
www.rottlermfg.com
Chapter 2 Introduction / Safety / Installation:
Introduction:
This manual is arranged into sections as listed in the table of contents.
It is required that the new user of the SG9A read this manual, in particular the sections concerning safety,
before operating the machine.
The Controls Definition and Operating Instructions chapters should be read very carefully in order to familiarize
the user with the actual button pushing sequences required to carry out a job. These chapters in the manual
should be considered an introduction.
Limited Warranty:
Rottler Manufacturing Company Model SG9A parts and equipment is warranted as to materials and
workmanship. This limited warranty remains in effect for one year from the date of delivery, provided the
machine is owned and operated by the original purchaser and is operated and maintained as per the
instructions in the manual.
Tools proven to be defective within the warranty period will be repaired or replaced at the factory’s option.
The products are warranted upon delivery to conform to their published specifications and to be free from
defects in material and workmanship under normal use for a period of one year from shipment. Should a
product not be as warranted, Rottler sole obligation shall be, at its option, to repair, correct or replace the
product or to refund the amounts paid for the Product upon its return to a location designated by Rottler. No
warranty shall extend to rapid wear Products (including tooling) or to Products which have been subject to
misuse (including any use contrary to Rottler instructions), neglect, accident (including during shipment),
improper handling or installation, or subject to any modification, repair or service not certified by Rottler. Rottler
shall not be liable for any consequential, direct or indirect damages or for any other injury or loss. Buyer waives
any right, beyond the foregoing warranty, to make a claim against Rottler. No warranty is provided for any
Products not paid in full.
Merchandise cannot be returned to Rottler without prior approval. Customer must contact the Order
Department or representative to get approval and to be issued a Return Goods Authorization number (RGA #).
Merchandise authorized for return must be returned prepaid. If merchandise is returned with shipping charges
collect, the actual amount of these charges may be deducted from any credit which may be due the customer.
The RGA # assigned by the Order Department should be written on the shipping label and must appear on a
copy of the invoice(s) covering the original shipment. This invoice copy must be included in the box with the
parts. Shipment must contain ONLY those items on the RGA as approved for return. Merchandise must be
received within 10 days of the date of RGA or the RGA will be canceled. All returned merchandise may be
subject to a 20% restocking fee on under $10,000.00 amount or 10% on any items over $10,000.00. Parts or
tooling over 30 days old are considered as customer property and can only be returned with prior written
approval from Rottler Corporation Management and/or Shipping Department.
The issuance of a RGA DOES NOT guarantee credit - it is only authorization for the return of the goods. Credit
for return merchandise is at the sole discretion of Rottler. Credit will be issued only after inspection of returned
goods.
Tools proven to be defective within the warranty period will be repaired or replaced at the factory’s option.
We accept no responsibility for defects caused by external damage, wear, abuse, or misuse, nor do we accept
any obligation to provide compensation for direct or indirect costs in connection with cases covered by the
warranty.
Freight charges on warranty items (non-air shipment only) will be paid by Rottler Manufacturing for a period of
60 days only from the date of installation or set-up by a qualified service technician or sales representative.
Freight charges after the 60 day period are the customer’s responsibility.
