-13-
_____________________________________________________________________________
_
_________________________________________________________________________________
_
in_m22.doc
Accessories
Extension cable for the HygroClip S (used with model M22W)
MOK-xx-DAT05: (xx = 1, 2 or 5 meters)
Calibration cable for the HygroClip S
The MOK-03-WIN cable is used to calibrate the HygroClip S probe independently from the M22
transmitter. The MOK-03-WIN cable connects the HygroClip S probe to the COM port of a PC.
This cable is shipped together with the Rotronic HW3 software which is used to read and
calibrate the probe from the PC.
The requirements for using HW3 are as follows:
3 m
PC
Pentium 233MHz or better
Windows
®
95/98,Me, XP or NT or 2000
®
Memory
64MB
Disk Space
20MB free
Drives
CD ROM drive required
Monitor
VGA or Super VGA
Resolution
1024 x 768 or higher (set to small fonts)
High Color 16Bit (256 Color minimum)
COM Port
RS232 (COM 1-4)
Software
HW3 (includes - MSIE 4.0 Browser - Adobe
®
Acrobat Reader)
MS Internet Explorer: for best viewing, set fonts to smallest
For more details see separate instruction manual provided with the HW3 software.
