4
Rotolight Stealth RL48/RL48-A User Guide
5
www.rotolight.com
5
1 How to fit or remove the Filter Holder
3)
Finally squeeze the filterholder evenly
round the edge for a nice firm snug fit.
To remove the filter holder place your
thumb in the middle of the front face of
the Rotolight (near the switch), and use
your other fingers to lift the outer edge of
the filterholder away from the face of the
Rotolight.
2)
To fix the filter holder on your Rotolight
hold the filter holder in your left hand
with open side facing upwards and push
the Rotolight (face down) into the centre
of the filter holder. (it is a ‘push to fit’ de-
vice)
1)
This is the Filter Holder. It will hold any
combination of the supplied ‘Lee filters’
ringfilters to colour calibrate, dim or dif-
fuse your Rotolight. Refer to the cali-
bration chart to select the closest filter
combination that matches your ambient
lighting environment. e.g. for 5600K (stu-
dio daylight) use a 223 filter
Summary of Contents for Stealth RL48
Page 1: ......
