Roto 84, Mounting Instructions

Page: 7 / 82

7
!
General safety instructions
• These installation instructions are intended for
trained personnel.
• As specified in VDE 0022, the operating company and
the installer are responsible for compliance with the
regulations put forth by the public utility provider and
the VDE (German Association of Electrical Engineers).
• The fitter of the product is expected to have skills in
the following areas:
• Compliance with accident prevention regulations
• Correct handling of ladders/climbing equipment
• Correct attachment of fixing materials
• Correct evaluation of the building fabric
• Correct product operation and commissioning
• Safety provisions and precautionary measures
when handling electricity
• Expert electrical-technical knowledge
• If the fitter does not possess one or more of these
qualifications,
the work must be carried out by
a specialist fitting company .
• Read this manual carefully before installing and
operating the device.
• Heed all installation steps, instructions and notes.
• Ensure that this manual is accessible to all users.
• Keep this manual in a safe place until you dispose of
the product.
• If the product changes hands, pass this manual on to
the new owner.
Intended use
The blackout blind is intended for indoor use and for
blacking out rooms.
It may only be installed and used on the Roto skylight
types designed for their use.
The blackout blind protects against laterally incident
light. The patterns are opaque but do not to black out
the room completely (in a physical sense).
Fabric blinds, such as those used for blackout blinds,
may become slightly wavy at the edges, allowing light
to pass through laterally. This is not a product fault.
Technical data
The dimensions depend on the type and size of the
window.
Unpacking/checking the scope of delivery
(Fig. A1)
⚠
Risk of suffocation!
Plastic parts, polystyrene, screws, small parts,
etc., can be very dangerous for children to
play with.
> Do not leave the packaging material and installation
parts lying around, and keep away from children
and toddlers.
> Keep children away from the installation site
throughout the installation procedure.
• Please dispose of the packaging material (cardboard,
polystyrene, plastic bag) according to local regulations.
• Please check the scope of delivery. If parts are missing,
consult the specialist dealer.
• The screwing aid (Fig. A1, part K) is a tool and not
an installable part.
Preparing tools/aids
(Fig. A2)
• Pencil
• Electric/cordless drill with drill attachment (Ø 10 mm)
• Cross-head screwdriver, PZ1
• Hex key (5 mm)
• Side cutter
• Yardstick/tape measure
• If needed: stable climbing equipment (step ladder)
• Screwing aid (Fig. A1, part K)
General information on installation
(Fig. 1)
This manual contains installation instructions for various
types of windows:
• Type 84, Type R8 (wood or plastic)
• Type 6.., Type R6 (wood or plastic)
• Type WDT 6.., Type WDT R6 (wood or plastic)
• Type WDC i8 (plastic)
To perform the installation properly and find the appro-
priate installation steps, the window type must be
determined before you start:
• Open the window completely.
• Read and note the data on the type label.
English