Page 9
FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
REMEMBER:
Your best assurance against accidents is a careful and responsible operator. If there is any portion of this
manual or function you do not understand, contact your dealer or the ROTO-MIX plant.
Safety Decal Care
1. Keep safety decals and signs clean and legible at all times.
2. Replace safety decals and signs that are missing or have become illegible.
3. Replaced parts that displayed a safety sign should also display the current sign.
4. Safety decals or signs are available from your dealer or the ROTO-MIX manufacturing plant.
5. How to Install Safety Decals:
A. Be sure that the installation area is clean and dry.
B. Decide on the exact position before you remove the backing paper.
C. Remove the smallest portion of the split backing paper.
D. Align the decal over the specified area and carefully press the small portion with the exposed
sticky backing in place.
E. Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in
place.
F. Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing
paper.
FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
SPREADER SAFETY
PRACTICE FIRE PREVENTION
Keep fire extinguishers accessible at all times. Use the extinguisher recommended for the material being
processed. It should be rated safe for use on electrical fires.
Never smoke close to combustible material.
Clean the area before welding or other activities which may make sparks.
Keep all components that generate excessive heat clear of oil and other combustible materials.
