REMEMBER
:
Your best assurance against accidents is a careful and responsible operator. If there is any portion of this manual
or function you do not understand, contact your dealer or the ROTO-MIX plant.
Safety Decal Care
1.
Keep safety decals and signs clean and legible at all times.
2.
Replace safety decals and signs that are missing or have become illegible.
3.
Replaced parts that displayed a safety sign should also display the current sign.
4.
Safety decals or signs are available from your dealer or the ROTO-MIX manufacturing plant.
5.
How to Install Safety Decals:
A.
Be sure that the installation area is clean and dry.
B.
Decide on the exact position before you remove the backing paper.
C.
Remove the smallest portion of the split backing paper.
D.
Align the decal over the specified area and carefully press the small portion with the exposed sticky
backing in place.
E.
Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
F.
Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing paper.
FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
Page 10
