Roto-Mix 920-18, Assembly, Operation And Parts Manual

Page: 15 / 97

15
SAFETY DECAL CARE
Keep safety decals and signs clean and legible at all times.
Replace safety decals and signs that are missing or have become illegible.
Replaced parts that displayed a safety sign should also display the current sign.
Safety decals or signs are available from your dealer or the ROTO-MIX
manufacturing plant.
How to Install Safety Decals:
Be sure that the installation area is clean and dry.
Decide on the exact position before you remove the backing paper.
Remove the smallest portion of the split backing paper.
Align the decal over the specified area and carefully press the small portion with
the exposed sticky backing in place.
Slowly peel back the remaining paper and carefully smooth the remaining portion
of the decal in place.
Small air pockets can be pierced with a pin and smoothed out using the piece of
decal backing paper.
SAFETY
READ BEFORE
YOU FEED
PRACTICE FIRE PREVENTION
Keep fire extinguishers accessible at all times. Use the extinguisher
recommended for the material being processed. It should be rated safe for use on
electrical fires.
Never smoke close to combustible material.
Clean the area before welding or other activities which may make sparks.
Keep all components that generate excessive heat clear of oil and other
combustible materials.