18
HIGHWAY AND TRANSPORT OPERATIONS (CONT.):
Comply with state and local laws governing highway safety and movement of
farm machinery on public roads.
Use approved accessory lighting flags and necessary warning devices to protect
operators of other vehicles on the highway during daylight and nighttime
transport.
The use of flashing amber lights is acceptable in most localities. However, some
localities prohibit their use. Local laws should be checked for all highway lighting
and marking requirements.
When driving the mixer/feeder on the road or highway under 20 MPH (40 KPH) at
night or during the day, use flashing amber warning lights and a slow moving
vehicle (SMV) identification emblem.
Plan your route to avoid heavy traffic.
Be a safe courteous driver. Always yield to oncoming traffic in all situations,
including narrow bridges, intersections, etc.
Be observant of bridge loading ratings. Do not cross bridges rated lower than he
gross weight at which you are operating.
Watch for obstructions overhead and to the side while transporting.
Always operate mixer/feeder in a position to provide maximum visibility at all
times. Make allowances for increased length and weight of the mixer/feeder
when making turns, stopping the unit, etc.
PERFORMING MAINTENANCE:
Good maintenance is your responsibility. Poor maintenance is an invitation to
trouble.
Make sure there is plenty of ventilation. Never operate the engine of the vehicle
in a closed building. The exhaust fumes may cause asphyxiation.
Before working on the mixer/feeder, stop the vehicle, set the brakes, disengage
the PTO and all power drives, shut off the engine and remove the ignition keys.
Be certain all moving parts on attachments have come to a complete stop before
attempting to perform maintenance.
SAFETY
READ BEFORE
YOU FEED