Roto Frank C600 Installation Maintenance And Operating Instructions Download

Page: 38 / 64



July 2017



IMO_457_DE_v0

Roto Safe C | C600 | C600 – Tandeo | H600

Subject to change.

Installation

Drilling and routing dimensions on the frame

C600 | H600 with 6 additional locks (4C2QB, Quadbolt)

Carry out routing in accordance with the adjacent
drawing.

NOTE

The routing refers to PVC and aluminium
strikers.
Request the routing drawing for wood strikers.

NOTE

The routing depth depends on the leg height
on the striker.

Example – Combination striker:

– Striker height =

24.5 mm

– Leg height =

7 mm

– Min. routing depth = 17.5 mm

NOTE

The routing axis depends on the profile.

9.5

14.5

135

Routing axis

Faceplate marking

Drilling and routing dimensions on the frame
C600 | H600 with 6 additional locks (4C2QB, Quadbolt)

Pattern

6291

782

516

250

Summary of Contents for C600

































































Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands

Roto Frank C600, Installation Maintenance And Operating Instructions

Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands