© Rotigrill Limited
“Rotigrill provides an entertaining cooking experience for those who enjoy food and the
theatre of cooking”
We manufacture and sell a range of outdoor cooking equipment designed to provide a flexible
cooking platform, which includes a variety of functions. The main feature on all our products is the
rotisserie. This produces the tastiest, most moist and thoroughly cooked food that can be produced
on a BBQ.
In addition to our range of rotisserie bbq’s, there are two specialist machines: The “Hog Roaster”
and “XL3”. These are designed to do a specific job and to provide customers with the sight and smell
of a cooking “event”. This is what we call “The Theatre Of Cooking”.
Thank you for choosing our “XL3”
. This machine is designed to be flexible and robust. It is based on
a proven design and used with care; it will produce stunning results over a considerable period of
time.
This booklet is intended to show you how to set up, operate, cook and care for your “XL3”.
Contents:
o
Assembly Instructions
o
Operating Instructions and Safety
o
Advice On Motors
o
Rotisserie Cooking Guide
Please contact us if you need any further help or advice:
Rotigrill Limited
t:
01494 511368
e:
w:
www.rotigrill.com
1
Introduction
Turn the XL3 the right way up and
tighten the bolts and
Fit the “U” shaped handle to the inside
of the wheels, just underneath the
external fire tray. (O
Tap the handles on to the three main
rotisserie skewers.
A tip is to tap the
pointed end as a guide and then fit the
blunt end into the handle. Tap in to
finish.
Place the skewers into the m
Undo the nut from the handle and
push the threaded
1.
Turn the pre-assembled
Use a Phillips screwdriver to locate one
of the holes in
Insert the legs (each leg is colour
coded), so just match the coloured
dots on the leg to the tray.
the nut to the bolt from the
inside.
Tighten the nuts by hand
only at this stage.
kebab gear drive.
here.
nuts that secure the legs with a
spanner from inside the tra
Turn the XL3 the right way up and
tighten the bolts and nu
Fit the “U” shaped handle to the inside
of the wheels, just underneath the
external fire tray. (O
Tap the handles on to the three main
rotisserie skewers.
A tip is to tap the
pointed end as a guide and then fit the
blunt end into the handle. Tap in to
finish.
Place the skewers into the m
Undo the nut from the handle and
push the threaded
1.
Turn the pre-assemb
Use a Phillips screwdriver to locate one
of the holes in
Insert the legs (each leg is colour
coded), so just match the coloured
dots on the leg to the tray.
n the nut to the bolt from
the inside.
Tighten the nuts by hand
only at this stage.
ebab gear drive.
here.
ts that secure the legs with a spanner
from inside the tray.
Turn the XL3 the right way up and
tighten the bolts and nu
Summary of Contents for XL3
Page 1: ... Rotigrill Limited XL3 ...