Rothenberger ROWELD BS 630 Plus, Instructions For Use Manual, Page: 13 / 20

ENGLISH 11
3. Intended use
The band saw machine type BS 630 Plus is intended exclusively for the sawing of plastic tubes.
The intended use also includes reading this manual as well as adherence to all instructions
contained in it – in particular the safety instructions. Furthermore, it also includes that all
inspection and maintenance work is accomplished within the prescribed time intervals.
The permissible dimensions for the material to be processed, as well as the other technical
pecifications indicated in the section "Technical data" of this chapter, must be observed without
exception.
DANGER! If the band saw machine type BS 630 Plus is not used in accordance
with this regulation, then no safe operation of the machine is ensured.
DANGER! For all damages to property and persons that result from not intended
use, not the manufacturer but the operator of the band saw is responsible.
4. Standard equipment
Machine stand in robust distortion-free structural steelwork.
Saw frame in distortion-free structural steelwork.
2,5 kW drive motor with overload protection.
Electrically controlled continuously variable cutter feed
Saw band deflection with ball bearings.
Saw band tensioning device.
Angle cuts 0 ° - 45 ° to both sides via removable saw arm.
Angle scale for reading the degree of adjustment.
Control cabinet with ON-OFF main switch,
Control console swiveling with emergency stop, Two-hand operating.
Motor protection switch
Electrical equipment 400 V , 50 / 60 Hz
1 Saw band.
1 Operating instruction.
5. Technical data (fig. A)
Dimensions and weight:
Length ..............................................2300 mm
Width................................................2800 mm
Height (transport height) ...................2050 mm
max. Width (bow extended) ..............2750 mm
Weight..............................................480 kg
Electrical data:
Drive motor.......................................400 V - 2,5 kw - 50 / 60 Hz
Saw Frame motor..............................400 V - 0,37 kw - 50 / 60 Hz
Saw band:
Dimensions .......................................6280 x 25 x 0,9mm
Quality ..............................................Fusion cut