Rothenberger ROCAM 4, Instructions For Use Manual

Page: 30 / 204

26 ENGLISH
3.6 ROCAM
®
positioning
The grey, cylinder-shaped positioning probe ( B ) can be
screwed by hand between the camera head ( C ) and the
bending spring ( A ). Only finger tight, to avoid damaging
threads!
The positioning probe emits magnetic fields that are re-
ceived by the positioning receiver and are transformed
visually and audibly.
The 33 kHz measuring system can penetrate masonry, stone, wood and plastic.
The intensity of the signal changes depending on the position and distance from the receiver.
3.7 Monitor unit with touchscreen
The ROCAM
®
4 comes with a 4GB SD card to save photo's and video's.
This can be removed for data transfer.
Connections Micro-HDMI, mini USB and SD card are on the side of the
monitor unit.
3.8 User interface start up screen
LED Indicator (1 – 10) Zoom Indicator (1.0 – 2.0)
Cable measurement (Ft. / Meter)
Wi-Fi Indicator (on/off)
Meter counter ( Reset by touching) Battery Indicator
LED +/-
Zoom +/-
Picture / Video
Settings
Record
Photo / Video
Gallery
open damage catalog
Choose the type of damage in the damage catalog and confirm . This will be shown in the left
bottom of the screen, and also by saving images/videos:
A B C