Usage
28
GB
Soldering / desoldering
• Switch on the soldering station (see chapter "Switching on and off").
• Set the operating temperature required for your work ( see chapter "Setting
the operating temperature").
• The soldering tip used
7
/
9
has to be tinned before you start soldering.
To do this, heat up a new or a soldering tip that has been cleaned using the
cleaning sponge
8
and coat it by making contact with the solder wire.
• Before starting work on the a particular workpiece and/or type of material,
check for suitability by testing the soldering iron on a similar piece of (scrap)
material.
• Clean the parts to be joined before soldering.
• Touch the edge of the appropriate flux-cored solder wire to the end of the
soldering tip , to melt the solder wire. The workpiece is coated with the flux,
which flows out of the solder wire, allowing the solder to join the metal.
- If the soldering iron is used for longer periods we recommend that you clean
the tip occasionally with the cleaning sponge and re-tin the tip if necessary.
• Switch off the soldering station (see chapter "Switching on and off").
• Place the soldering iron in the soldering iron stand
11
to cool it down
completely
CAUTION!
The soldering iron and the soldering tip remain hot for some time after
switching off / disconnecting!
1500003259_Anleitung_DE_GB_FR.indb 28
1500003259_Anleitung_DE_GB_FR.indb 28
02.12.2019 13:13:02
02.12.2019 13:13:02
