8 | Roth SUB ZERO II User Manual
Sub Zero II
TV Soundbar with bluetooth APT-X
Wall Mounting
Determine how you want to set up your Sub Zero ii Soundbar.
The Sub Zero II Soundbar comes with a wall mounting kit to be used with a wall mounted TV. The input jacks and power cord are
designed to allow a flush mount.
Follow these steps to mount the Sub Zero ii Soundbar on a wall:
1. Measure the width of the TV - the Sub Zero II should be
mounted so it is centered with the TV. Divide the TV width
measurement by 2 - that will be the centerline distance from
the edges of the TV.
2. If the Sub Zero II is to be mounted below the TV, measure
from the TV edge to the centerline distance on the open wall
below the TV. Mark the distance with a pencil 38mm or more
below the bottom of the TV.
3. Make a pencil mark 230 mm on each side of the centerline.
Make sure the mark is the same distance down from the TV
on each side.
4. Drill a hole in the wall at either of the two pencil
marks.
5. Hammer the 2 wall mount anchors into the holes -
the anchors should be flush with the wall.
6. Now, using a Phillips screwdriver, screw the wall
brackets in place with the screws going into the
anchors.
7. Tilting the bottom of the Sub Zero II slightly away
from the wall, guide the brackets into the matching
holes on the back of Sub Zero II. The Sub Zero II is
now securely wall mounted.
NOTES
The supplied mounting kit can be used for typical drywall construction. Mounting to wood, concrete, brick or other
types of wall construction will require different hardware. Roth AV recommends seeking professional assistance for
such installations. The instructions on this page and the supplied wall mount kit are only for the vertical wall mount.
Professional assistance is required for other mounting or installation orientations (e.g., horizontal, tilted).
1. Find centerline
of TV.
3. Make a pencil
mark on each side of
centerline.
X/2”
X/2”
+
+
230 mm
230 mm
2. Make a pencil mark 38mm
or more below the bottom
of TV.
38mm
or more
X”
++
++
230 mm
230 mm
38mm
or more
30mm
4. Make another pencil mark on
each side of centerline.
Roth Sub Zero II Manual UK EM.indd 8
11/10/2013 10:12
