background image

rothaudio.co.uk   |   3

User Manual

English

For technical  support call 0800 999 3437

Important Information

READ BEFORE OPERATING EQUIPMENT

Read all the instructions carefully before using the unit and 
keep them for future reference. Check that the voltage 
selector is switched to the correct position for your country.

Safety Instructions

-  Do not use this product near water or moisture.

-   Do not place the unit on sloped or unstable surfaces as

  the unit may fall off or tip over.

-  Clean only with a dry cloth. Unplug this product from  
  the wall outlet.

-  Do not attempt to service this product yourself.

-  Opening or removing covers may expose you to
  dangerous voltages or other hazards.

-  Please contact the manufacturer to be referred to an
  authorised service centre near you.

-  Place the unit on a solid surface.

-  Do not block any ventilation openings.

-  To prevent risk of fire or electric shock, avoid over

loading  

  wall outlets.

-  Do not put it in a closed bookcase or cabinet that may

  keep air from flowing through its ventilation openings.

-  Do not let objects or liquids enter the product.

-  Protect the power cord from being walked on or  

  pinched, particularly at plugs and the point where they  

  exit from the product.

Unpacking

These speakers were carefully tested and inspected during 
production and before packaging and shipping. After 
unpacking please check for any damage. It is rare that a 

unit is damaged during shipping, but if this does happen 

contact your retailer immediately.

We recommend that you keep the original carton and 
packing material for future shipping.

Recommended Speaker Setup

Correct speaker placement has a huge impact on sound 

quality. There are many different theories, but all rooms and 
tastes are different so it’s impossible to specify a correct 

placement. We do suggest you experiment with a few 

different locations see what is best for you. For the best 

bass response we recommend that you keep a minimum 
distance of 20-25cm between the speakers and the rear 
wall. For height positioning the speakers with the tweeters 
at eye level of your most common listening position.

Conditioning and Break-in

We recommend that you play between 24 to 48 hours 
of music through the speakers before doing any critical 
listening or speaker placement.

Cleaning

We don’t recommend using any solvents or cleaners on 

cabinets or speaker drive units. Use a soft clean cloth to 
wipe the speakers.

DANGEROUS VOLTAGE

Conductor dangerous voltage, that may be of sufficient magnitude to constitute 
a risk of electric shock to persons is present within this product’s enclosure.

ATTENTION

The owner’s manual contains important operating and maintenance 
instructions, for your safety, it is necessary to refer to the manual.

Summary of Contents for Pro Audio 5

















Reviews: