14
FA ROTEX RoCon mb • 09/2017
3
x
Operation
3.4.3 Temperature setting of daytime room
temperature
In rotary switch position
, the target room temperatures during
the day for room heating are defined.
●
Set the rotary switch to the
"Set Temp Day"
position.
An overview is displayed.
●
Select the temperature block to be set with the rotary button.
●
Confirm the selection with a brief push of the rotary button.
Settings are displayed.
●
Set the temperature.
●
Confirm the selection with a brief push of the rotary button.
Change has been accepted. Jump back to previous dis-
play.
Detailed explanations and possible setting values for this rotary switch setting can
be found in chap. 6.5.
3.4.4 Temperature setting of setback mode
In rotary switch position
, the target room temperatures in re-
ducing mode for room heating are defined.
●
Set the rotary switch to the
"Set Temp Night"
position.
An overview is displayed.
●
Select the parameter to be set with the rotary button.
●
Confirm the selection with a brief push of the rotary button.
– [T-Reduced]: Setting value for "Reducing" operating
mode or reduction through permanent time program.
– [T-Absence]: Setting value for temporary heating/cooling
programs ("Away" and "Vacation").
Settings are displayed.
●
Set the temperature.
●
Confirm the selection with a brief push of the rotary button.
Change has been accepted. Jump back to previous dis-
play.
Detailed explanations and possible setting values for this rotary switch setting can
be found in chap. 6.6.
3.4.5 Temperature setting of hot water generation
In rotary switch position
, the target hot water temperatures
for hot water preparation for the respective time programs are de-
fined.
●
Set the rotary switch to the
"DHW Set Temp"
position.
●
Select the temperature block to be set with the rotary button.
●
Confirm the selection with a brief push of the rotary button.
Settings are displayed.
●
Set the temperature.
●
Confirm the selection with a brief push of the rotary button.
Change has been accepted. Jump back to previous dis-
play.
Detailed explanations and possible setting values for this rotary switch setting can
be found in chap. 6.7.
3.4.6 Unscheduled hot water preparation
In rotary switch position
the hot water can be recharged
manually, outside of a hot water time program, to the target tem-
perature set as default in the parameter [T-DHW Setpoint 1]. The
heating up is carried out with priority and independent of other
heating programs.
●
Set the rotary switch to the
"DHW Install"
position.
An overview is displayed.
●
Select the parameter to be set with the rotary button.
– [1x Hot Water]: Activation of one-time hot water genera-
tion.
●
Confirm the selection with a brief push of the rotary button.
●
Set the parameter.
●
Confirm the selection with a brief push of the rotary button.
The unscheduled hot water generation starts.
Detailed explanations and possible setting values for this rotary switch setting can
be found in chap. 6.3.
3.4.7 Switching time program
For comfortable and individual room and hot water temperature
control, different (but freely adjustable) time programs preset at
the factory can be selected.
The switching time programs control the assigned heating circuit,
the storage charging circuit as well as an optionally connected
circulation pump according to the specified switching times.
Setting
In the
rotary switch setting, the time intervals for the
heating circuit, integrated hot water generation and the optional
circulation pump are set.
●
Set the rotary switch to the
"Time Program"
position.
An overview is displayed.
●
Use the rotary button to select the time program to be set.
●
Confirm the selection with a brief push of the rotary button.
Settings are displayed.
●
Use the rotary button to select and change the value to be
adjusted.
●
Confirm the selection with a brief push of the rotary button.
More detailed explanations and possible setting values for this rotary switch position
can be found in chap. 6.8.
The last digits of the parameter designations (1 - 3)
within this rotary switch setting mark the affiliation to
the respective cycle of the time program.
The last digits of the parameter designations (1 - 3)
within this rotary switch setting mark the affiliation to
the respective cycle of the time program.
After this temporary function has elapsed, the control
unit automatically jumps back to the previously active
operating mode. The rotary switch should therefore be
brought back into the
"Info"
position after the
function has been activated.
The function is subject to time limitations.
At the latest, it is cancelled after the maximum loading time set
in the parameter [Max DHW loading time], and can be restarted
at the earliest after the blocking time set in the parameter [DHW
Off Time] has expired (see chap. 6.2.4).
