4
x
Set-up and installation
●
Effective strain relief in the controller housing by means of
cable ties must be ensured for all cables connected to the
ROTEX GCU compact.
●
Check the holding force of the strain relief.
●
Bring the controller housing back into the vertical operating
position. Make sure that no cables are jammed.
●
Open the front panel (fig. 4-31).
●
Insert the cables in the controller housing
●
Lay the cabling in the controller housing (fig. 4-32) and
connect the electrical connections in accordance with
fig. 4-33 and the subsequent sections in chap. 4.7.
Switchboard PCB
Fig. 4-30 Cable guiding and strain relief
Fig. 4-31 Opening the front panel
Fig. 4-32 Install the cabling in the
controller and establish
the electrical connec-
tions.
Fig. 4-33 Connection diagram of the PCB jumpers and cable colours of
the factory-installed connection cables (for legend, see
tab. 4-3)
Summary of Contents for GCU compact 315
Page 81: ...13 x Notes 13 Notes...
Page 82: ...13 x Notes...
