Rotenso TA35X, User Manual

Page: 48 / 52

48
User manual
Room air conditioner - TETA X
EN
PART 5. OPERATING INSTRUCTIONS
10. SWING function
1. Press the button SWING to activate the louver,
a. Press to activate the horizontal flaps to swing from up to down, the will appear
on the remote display.
b. Press to active the vertical deflectors to swing from left to right, the will appear
on the remote display.
c. Do it again to stop the swing movement at the current angle.
2. Long press or over 3 seconds to select more angles of the airflow direction.
NOTE
• Never position Flaps manually, the delicate mechanism might seriously damaged!
• Never put fingers, sticks or other objects into the air inlet or outlet vents. Such
accidental contact with live parts might cause unforeseeable damage or injury.
11. TURBO function
To activate turbo function, press the
button, and
will appear on the display.
Press again to cancel this function.
In COOL/ HEAT mode, when you select TURBO feature, the appliance will turn to quick
COOL or quick HEAT mode, and operate the highest fan speed to blow strong airflow.
12. MUTE function
1. Press
button to active this function, and will appears on the remote display.
Do it again to deactivate this function.
2. When the MUTE function runs, the remote controller will display the auto fan speed, and
the indoor unit will operate at lowest fan speed to be quiet feeling.
3. When press FAN/ TURBO button, the MUTE function will be cancel. MUTE function can
not be activated under dry mode.
13. ECO function
In this mode the appliance automatically sets the operation to save energy.
Press the
button, the appears on the display, and the appliance will run in ECO mode.
Press again to cancel it.
NOTE: The ECO function is available in both COOLING and HEATING modes.