48
User manual
Room air conditioner - REVIO X
EN
PART 2. OPERATING THE DEVICE
5. ADJUSTING THE AIR FLOW DIRECTION
Incorrect adjustment of the air flow direction may cause
uneven temperature distribution in the room and the related
discomfort.
Use the wireless remote control to adjust the position of the
horizontal blinds. Vertical blinds must be adjusted manually.
Adjusting the air outflow in the vertical plane
(up and down)
Adjustments should be made while the indoor unit is on,
using the wireless remote control. Each time the blind
position button is pressed, the angle of inclination changes by
6°. Detailed information can be found in the remote control
manual.
Adjusting the airflow in a horizontal plane
(left - right)
Adjustments should be made while the indoor unit is on,
using the wireless remote control. Each time the blind position
button is pressed, the angle of inclination changes. Detailed
information can be found in the remote control manual.
ATTENTION
• When the air conditioner is in cooling or dehumidifying operation for a long time, do not direct the air
flow downwards. This can cause condensation on the surface of the blinds and water drops to fall on
the floor or furniture.
• If you turn on the device immediately after turning it off, the horizontal louvers may not move for about
10 seconds.
• The opening angle of the horizontal louvers should not be too small, as it may affect the efficiency of
heating or cooling by limiting the air flow.
• Do not move the horizontal louvers by hand. This may cause them to desynchronize. If this happens,
turn off the device, disconnect it from the power supply for a few seconds, and then restart it.
• Do not use the device when the horizontal louvers are in the closed position.