Rotenso QUBE Q35W, User Manual

Page: 13 / 16

QUBE W - Air purifier
13
User manual
PART 6. CLEAN AND MAINTENANCE
In order to get the most from your air purifier, and to prolong the life of the filters it is necessary to maintain
the machine properly.
HOW TO MAINTAIN YOUR AIR PURIFIER
• Host machine:
This machine is equipped with anion generator, so some dust may accumulate on the
outside of the machine. Please use a wet soft cloth with water containing a little detergent to clean the
outside of the machine. Do NOT use any water on the inside of the machine.
• Filters: The built-in program will inform you in case you need to replace any filter. However the filters
need to be maintained and cleaned regularly to achieve the best performance and to optimize the ser-
vice life of the filters.
• To clean the filters simply wipe down with a dry cloth, or use vacuum cleaner to clean them up. Do
NOT use any water on the filters as any water on the EPA filter will destroy it.
• Also the activated carbon filter can be basked in the sun for 1-3 hours, to recharge the carbon
molecules on a regular basis.
• Sensor:
There is a very sensitive optical sensor. After prolonged use, dust particles may adhereto the lens
surface of sensor and lower the sensor’s sensitivity.
To clean the sensor, please clean the outside of the sensor panel with a soft brush. Thereafter open the
panel and wipe the lens using an ear bud. Use a neutral detergent to wipe.
ATTENTION
Before cleaning the air purifier you must disconnect the power supply.