RLD
|
3.0/4.01
20
6.2.2 Using a Communication Card
1. Connect the RLD to an RCLP card.
NOTE:
Verify that parameter "
ch
" is set to "
1 - 8
" (refer to System Parameter 2 – Channel, page 10).
2. Configure the channels. There are two numbering options:
o
Different numbers to each channel, with up to 8 different channels (when using multiple
RLD units).
o
Same number for more than one channel if you require the same behaviors from these
channels.
For example, two RLD units can control four channels using the communication line:
•
1
st
channel (A1) #1: 20%
•
2
nd
channel (A2) #2: 10%
•
3
rd
channel (B1) #2: 10% (same as A2)
•
4
th
channel (B2) #3: 90%